beautypg.com

Neff C77V60N2 User Manual

Page 53

background image

Neff

C77V60N2 | 03/2011

English |

53

Calc‘n‘Clean

Calc‘n‘Clean combines the separate func-

tions of descaling and cleaning. If the two

programmes are both due to run soon, the

fully automatic espresso machine suggests

this service programme automatically.

If the prompt

Service - Calc‘n‘Clean

is dis-

played, press and hold down

i (1) for at least

three seconds. The display shows:

Calc‘n‘Clean

Press

Y

or

To start without the prompt (see „Displaying

Settings”) press and hold down

i (1) for at

least three seconds and select

Calc‘n‘Clean

Press

Y

Press

z

(6). The display will guide you

through the programme.

Empty drip tray

Empty the drip tray (18).

Replace drip tray

Replace the drip tray.

If the milk frother is not inserted, the

following message is displayed:

Set up milk frother

Insert the milk frother (19).

Place container under milk frother

Y

Place a container with a capacity of at

least one litre under the milk frother (19).

Press

z

(6). The appliance rinses

twice:

Cleaning

Open drawer

Deploy the appliance and open the

drawer (10).

Insert cleaning tablet! Close drawer!

Drop a cleaning tablet in the drawer and

close the drawer again.

If the water filter is activated, the

following message is displayed:

Remove filter

Y

Remove the water filter and press

z

(6).

Add 0.5 l water and descaler

Y

Pour lukewarm water into the empty

water tank (8) up to the “0.5 l” mark and

dissolve two descaling tablets in it. Press

z

(6). The descaling programme now

runs for about 20 minutes:

Descaling

If there is not enough descaling

fluid in the water tank, the fol-

lowing message is displayed:

Not enough descaling fluid

Refill fluid

Pour lukewarm water into the empty water

tank (8) up to the “0.5 l” mark and dissolve

two descaling tablets in it. Press

z

(6).

The descaling programme will continue.

Clean and refill water tank

Y

Rinse the water tank and refill it with

fresh water up to the “max” mark.

Press

z

(6).

The descaling programme will now run

for about 1 minute:

Descaling

The cleaning programme then runs

for about 7 minutes and rinses the

appliance:

Cleaning

Empty drip tray

Empty the drip tray (18).

Replace drip tray

Replace the drip tray.

Replace the filter if one is being used.

The appliance is ready for use again.