Neff C77V60N2 - Manual (Page 38)

Neff C77V60N2 | 03/2011
38 | English
Operation
General
Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso ma-
chines. Do not use coffee beans that have
been glazed, caramelised or treated with
other additives containing sugar, since they
will block the brewing unit.
If the appliance is being used for the fi rst
time or has not been operated for a long
period, the fi rst cup of coffee will not have
the full aroma.
When using the espresso machine for the
fi rst time, you will achieve a suitably thick
and stable “crema” only after the fi rst few
cups have been dispensed.
The factory settings of the fully automatic
espresso machine are programmed for op-
timal performance. The appliance switches
to “energy saving mode” automatically after
one hour. This setting, like many others,
can be changed (see “Auto off after” under
“Displaying settings”).
Energy saving mode
If the drip tray is not in place, the appliance
cannot be switched on and no water fl ows
out of the coffee outlet. The message “Re-
place drip tray” appears. This message also
appears if the drip tray is removed while the
appliance is in “energy saving mode”. The
message disappears when the drip tray is
replaced. The appliance reverts to “energy
saving mode”.
Do not press the power switch while
the appliance is operating. The ap-
pliance should only be switched off
when it is in “energy saving mode”,
so that it can rinse automatically.
Setting up the appliance
1. Press the power switch (7).
7
2. The language selection is shown in the
display:
Einstellungen
Sprache
Deutsch English
3. Press the retractable navigation button
(4) to select the language in which you
want the display texts to appear.
The following languages can be selected:
Deutsch Português
English Dansk
Pycckий Norsk
Nederlands Suomi
Français Česky
Italiano Türkçe
Svenska Magyar
Español Ελληνικά
Polski Български
4. Press
z
(6). The language you se-
lected is saved.
You can change the language setting at
any time (see “Displaying settings”).