Schreiber Chillers MICRO MAX CHILLERS - Manual (Page 9)

9
INSIDE YOUR CHILLER
Electrical System:
• This chiller requires a power input of 220-volt single phase. The power supplier
to the controller is 24 VAC through a step-down transformer. The chiller can
operate at both 60Hz and 50Hz, however, there is a 12% reduction if cooling
capacity, and a 17% reduction in flow capacity at 50 Hz
• High voltage electrical components stored in the control box. Take careful
precaution when open the door. Door must be secure in place when the unit is
operating.
CONTROLLER SETTING:
Parameters overview:
TEMPERATURE DISPLAY
SET POINT BUTTON