Operator’s guide – BlueBird SG1314 User Manual

Page 9

· Shut off fuel while storing or transporting. Do not store fuel near flames or drain indoors.

· Park machine on level ground. Never allow untrained personnel to service machine.

· Use jack stands to support components when required.

· Remove spark plug wire before making any repairs.

· Use care when checking blade and teeth. Wear gloves and use caution when servicing.

· Keep hands and feet away from moving parts. If possible, do not make adjustments with the

engine running.

· Keep all parts in good working condition and all hardware tightened. Replace all worn or damaged

decals.

Normal Shutdown Procedure

· Move throttle down to the START/DISENGAGE POSITION

· Wait at least 20 seconds for the blade to stop

· Turn ON/OFF switch to OFF position

· Make sure blade rests on the ground and is at a complete stop before doing anything else

Emergency Shutdown Procedure

· Turn ON/OFF switch to OFF position

· Wait at least 20 seconds for the blade to stop

· Make sure blade rests on the ground and is at a complete stop before doing anything else

OPERATOR’S GUIDE

This manual is related to the following products: