Avision AM7100N (MT-0904B) - Manual (Page 83)

Scanning and Sharing Your Document
To scan and send your document to the product’s memory,
1. Place your document either on the flatbed glass or into the ADF input tray.
2. Press the SCAN button on the control panel to use the scan mode.
3.
Press the Right-arrow or the Left-arrow buttons until Net Scan appears. The
LCD screen shows the following screen.
Net Scan
Press W X, Start
4. Press the Start button, and then the display asks you to input an ID number.
For example, input your ID number, 123 by the Numeric pad.
ID:123
Press Num, Set
5. Press the Set button. The LCD screen shows the following display.
Scan: Parameter 3
Press W X, Start
If the ID number has already existed in the product memory, the LCD screen
will return to the previous screen to enter another ID number.
77