Avision AM7100N (MT-0904B) User Manual
Page 50
Combining Your Document
To
place the original on the scanner flatbed glass,
1.
Place your document on the glass. If your original is an ID card, align your
ID card with the ID Card mark.
2.
Press the Paper Saver button until the desired paper saver LED is lit. For
example, ID Copy, 2-Up (2-in-1) or 4-Up (4-in-1).
3.
When the 1
st
page is scanned, the screen shows the following message.
Next page: 1
Finish: 2
4.
Open document cover. Remove 1
st
page and insert 2
nd
page on the
document flatbed glass or turn the other side of the ID Card on the flatbed
glass. Press 1 (Note: The delay time is 30 seconds. If you have not
inserted 2
nd
page and press the Start button, this machine automatically
starts scanning.)
5.
Press 2. Copy is done. If you are using 4-UP, repeat step 4 and 5.
2-Up
4-Up
ID Card Copy
Note:
Making ID card copy using the duplex module may easily cause paperjam. It is
recommended to make ID card copy in simplex mode.
44