Avision DS320F (DF-0707S) - Manual (Page 37)

4-5
4.5 Adjusting Your Copy Density
To adjust your copy density,
1. Place your multi-page document on the ADF with your text Face Up
or your single page document on the glass with your text Face
Down .
2. Choose your desired density level by pressing the Density button.
The selected level will be indicated with a lit LED. Choice: Level 1, 2,
3, 4 (from top to the bottom). Level 4 indicates the darkest image.
Default is level 2.
3. Press the green Start button to begin copying. In a second, the copy
is done. If you wish to cancel current settings or stop making copies
during copying, simply press the Cancel and Stop button ( ).
4.6 Rescaling Your Original Document
To rescale your original document,
1. Place your multi-page document on the ADF with your text Face Up
or your single-page document on the glass with your text
Face
Down .
2. Choose your desired copy size by pressing the Rescaling button. The
choice includes 100%, Fit to page, 200%, and 50%. Default is 100%.
Selecting Fit to page allows you to rescale your original document so
that the entire contents will be copied on current paper of your printer.
3. Press the green Start button to begin copying. In a moment, the copy
is done. If you wish to cancel or stop making copies, simply press the
Cancel or Stop button ( ).