Avision DS320F (DF-0707S) - Manual (Page 33)

4-1
4. Making Your First Copy
Before You Begin !
Before you begin making copies from the device, make sure you have first
connected a supported printer and that the printer is turn on first before turning
on the device.
4.1 Using The Control Panel
With an easy-to-use control panel, the device allows you to make copies as easy
as a breeze.
The Control Panel
The Cancel/Stop button: Clear your current settings and
return to the default settings or stop your scanning or copying
during operation.
The Start button: Press to start copy.
The Copy Count button: Choose your copy count from 1 to
99. The number of copies will be shown on the display screen.
Default setting is 1.
The Rescaling button: Press to enlarge or reduce your
original. Default setting: 100%
ID Copy: The ID copy lets you copy the front and the rear side
of your ID card easily in one single sheet.
The Density button: Press to lighten or darken your image.
Choice: Level 1, Level 2, Level 3, and Level 4. Level 4 indicates
the darkest level. Default setting is level 2.