Avision DS320F (DF-0707S) - Manual (Page 36)

4-4
4.3 Making A Simple Copy
To make a simple copy,
1. Place your multi-page document on the ADF with your text Face Up or
place your single-page document on the glass with your text Face
Down .
2.
Press the green Start button to begin copying. In a second, the copy is
done. If you wish to cancel or stop making copies, simply press the
Cancel or Stop button ( ).
Note:
To make a simple copy, it is recommended to use the factory default settings
(Copy Count: 1, Rescaling: 100%, Density: Level 2). You can adjust the copy
settings later after you are familiar with the operation.
4.4 Increasing Your Copy Count
To increase your copy count,
1. Place your multi-page document on the ADF with your text Face Up
or your single page document on the glass with your text Face
Down .
2. Choose your copy count by pressing the Copy Count button.
The display screen will show the number of your copy count.
Default is 1.
3. Press the green Start button to begin copying. In a second, the copy
is done. If you wish to cancel current settings or stop making copies
during copying, simply press the Cancel and Stop button ( ).
Tip !
For effective operation, press the Copy Count button continually for a few
seconds, the copy count will be increased in a decimal unit such as 11, 21, 31,
and 41. To reset the copy count, you can press the Cancel button to make a
new start from 1.