Avision AV3200C User Manual

Page 56

6-5

Question: The scanned image always comes

out to be too dark.

Answer:

a) Use your application to
modify the Gamma setting to
2.2 and 1.8 for your printer and
monitor respectively.

b) Use Brightness setting from the

TWAIN user interface to get a
brighter image.

Question: The scanner works well otherwise,

but for the line art, the lines scanned
seem much thicker than those of the
original.

Answer: Use the Brightness or Threshold

setting to adjust the line art image.

6.2

PAPER JAM IN THE ADF

In the event of paper jam, please follow the procedures

below.

i).

Open the ADF cover as shown in Figure 7-1.

ii).

Pull the paper out of the ADF unit carefully.