Avision AV3200C - Manual (Page 17)

2-10
2.6 ADF SCANNING
Multiple documents can be fed automatically
using the ADF. Refer to Figure 2-6.
i). To prevent occasional paper jam when
automatically feeding multiple documents, fan
the paper before loading.
ii). Lift the balance wire.
iii). Place the documents onto the ADF paper chute
in either paper side (face-down, face-up), with
the leading edge in the auto feeder entrance.
Let the balance wire rest on the top of the
documents.
iv). Adjust the left and right guides so that they are
snug against the sides of the documents.
Figure 2-6 Loading Multiple Document
Document
Left
Guide
Balance Wire