Autel Maxivideo MV400 - Manual (Page 22)

20
 Always handle the tool with care. It is not shock-resistant.
 Do not disassemble the tool beyond what is shown in the
manual.
 Doing so will void your warranty.
5.5 On Screen Navigation
1) Splash Screen
When the tool is powered on, the first screen displayed is referred to
as the splash screen. (Fig. 11) This screen tells you the tool is
booting up. Once the tool is fully powered up, the screen will
automatically switch to the live screen.
Fig. 11
2) Live Screen
The live screen is where you will do most of your work. A live image
of what the imager head sees is displayed on the screen. You can
zoom, adjust screen backlighting, rotate images and videos, view and
capture photos and videos from this screen.
3) Switching from Still Image Capture to Video Capture
By default the tool will turn to still image capture when powered on.
Press Video/Camera button to switch between still image capture
and video capture as you needed.
4) Adjusting screen backlighting
Pressing RIGHT and LEFT arrow buttons on the key pad (in the
still camera mode) will increase or decrease the screen backlighting.