Autel Maxivideo MV400 - Manual (Page 17)

15
5. Operation Instructions
Always wear safety eye protection to protect your eyes against
dirt and other objects. Follow operation instructions to reduce the
risk of injury from electric shock, entanglement and other causes.
5.1 Basic Operation
NOTE: When in operation, the cable can be bent into a certain
shape. This may help you operate the cable into confined areas.
1) Hold the tool with LCD screen facing you and press Power
button to turn it on. Wait for two seconds, the first screen – a splash
screen is booting up, and then appear a live screen where you can do
most of your work.
2) Press OK button to capture photos in the camera mode; press OK
button to begin capturing videos in the video mode. Press
Camera/Video button to switch between two modes as you desired.
3) Press UP and DOWN arrow buttons to zoom in or out while in the
camera mode where you can see a zoom indicator bar as you adjust
zoom.
4) Press LEFT and RIGHT arrow buttons to decrease or increase
screen backlighting while in the camera mode where you can see a
brightness indicator bar as you adjust LED light intensity.
5) Press Play button to view captured photos and videos.
6) Press Trash Can/ Reverse button to delete captured photos and
videos as you needed when play back captured photos and videos.
7) Press Trash Can/ Reverse button to control the direction of the
real-time image and video as you needed in the live screen.
8) Press Setting/Back button to enter Setup mode or return to the
previous screen.
9) Use the supplied accessories to provide application flexibility.
10) Use the supplied USB cable to connect the tool to a PC to upload and
view captured photos and videos.
11) Connect the supplied video-out (TV-out) cable to video-out port of
the tool and the other end of the cable to the video-in port of a TV to
view a high quality real-time image.