Autel Maxivideo MV400 - Manual (Page 18)

16
5.2 Operation Precautions
 Use the tool only as directed. Do not operate the tool unless the
user’s manual has been read thoroughly and proper training has
been completed.
 The display unit is not waterproof. The imager head and cable
are waterproof, but not acid-proof or fireproof. Avoid
submersing the imager head and cable into corrosive, oily
places and be sure to keep the imager head and cable away from
high temperature objects.
 Do not immerse the tool and display unit in water. Such
measures reduce the risk of electric shock and damage.
 Do not use excessive force to insert or withdraw the imager
head and cable. This may result in damage to the tool or
inspection area.
 Do not use the imager head and cable to modify surroundings,
clear pathways or clogged areas.
 Do not place the imager head and cable into anything or
anywhere that may contain a live electric charge or moving
parts, which increases the risk of electric shock or entanglement
injuries.
 Do not use the tool for personal inspection or medical use in any
way. This is not a medical tool.
 Do not eat or smoke while operating the tool. Use hot, soapy
water to wash hands and other body parts exposed to drain
contents after using the tool to inspect drains and other areas
that may contain chemicals or bacteria, which will help prevent
contamination with toxic or infectious material.
 When the inspection is completed, carefully withdraw the
imager head and cable from inspection area.
 Store idle components out of the reach of children and other
untrained persons.
 Maintain the tool with care. Properly maintained tools are less
likely to cause injury.
 Do not drop the tool, if the tool is dropped accidently, check for
the breakage and any other conditions that may affect its
operation.