Alpha Technologies UPE-8 - Manual (Page 7)

745-179-C0-001 Rev. A
7
1. Cut the weather stripping, item 6, to length according to the
chart below:
2.1 Weather Stripping Installation Procedure
2. Installation
UPE-4
UPE-8
Enclosure
Model
Bottom Strip
(a)
Side Strips
(b)
30 Inches 19 Inches
30 Inches 31.75 Inches
2. Remove the front door of the enclosure.
3. Remove the protective paper from the adhesive strips, and press
the weather stripping into place, making sure the ends meet at the
corners and butt against the existing weather strip at the sides.
Some trimming may be necessary.
ATTENTION
Ensure that surfaces to receive adhesive
strips are clean and dry
6a
6b
6b
Fig. 2 Weather Stripping Placement