Alpha Technologies UPE-8 - Manual (Page 6)

745-179-C0-001 Rev. A
6
®
Each kit contains: (kit items are labeled 1 through 9)
3 Storm hood vent covers (items 4, 8, and 9)
2 Weather stripping, 3 pcs. (item 6)
8 Filter pads, 8 pcs. (items 1, 2, 3, and 7)
16 Rivets, 14 pcs.
1/2” drive hand drill
9/64” (#28) drill bit
Rivet gun with 1/8” nose piece
Heavy duty scissors or utility knife
Tape measure
Vacuum to remove metal shavings from interior of cabinet.
1.2 Parts List
1.3 Required Tools
1. Introduction
This storm hood and filter kit is designed for UPE Series
enclosures manufactured after mid-2002. If the enclosure
has louvers on the front door, this kit applies.
Correct Enclosure Wrong Enclosure
CAUTION
Storm Hood kit must be removed during
warm temperatures to prevent thermal
overload of power supply and batteries.
Fig. 1 Applicable Enclosure Style