Alpha Technologies Cordex 48-1kW 19 - Manual (Page 34)

Argus Technologies Ltd. 030-713-C0 Rev A WC
Printed in Canada. © 2008 Argus Technologies Ltd. ARGUS and CORDEX are trademarks of Argus Technologies Ltd. All Rights Reserved. Page 20 of 23
7.4 Factory Ranges and Defaults
The following table lists the rectifier settings/ranges/defaults; changes are made via the CXC:
Setting Range (minimum to maximum) Default
Float Voltage 47.5 – 58.2V 54V
Equalize Voltage 49.8 – 60.2V 55V
Battery Test Voltage 44 – 52V 46V
OVP See note below – 63V 57V
Current Limit 23 – 100% 100%
Power Limit 0 – 100% 100%
Module Start Delay 0 – 250s 1s
System Start Delay 0 – 600s 0s
Low Voltage Alarm 42 – 52V 44V
High Voltage Alarm 52 – 63V 55.5V
Equalize Timeout 1 – 2399h 30h
Battery Test Timeout 1 – 250h 8h
Softstart Ramp-rate Normal/Fast Normal
CL/PL Alarm Enable/Disable Enable
Remote Shutdown Enable/Disable Enable
Ramp Test Enable/Disable Enable
Table E–Cordex 48-1kW Rectifier factory ranges and defaults
NOTE: OVP cannot be set below the present system voltage, float voltage setting, equalize voltage setting, battery test
voltage setting or the safe mode voltage of 51.4V.