Alpha Technologies 32-0-10A Fuse Panel - Manual (Page 14)

A RGUS T ECHNOLOGIES 32-0-10A F USE P ANEL
020-103-C0 R EV B P AGE 6 of 6
5 A
DJUSTMENTS
5.1 GMT Fuse Replacement
Distribution fuses may be removed from the unit using an insulated hook. Check load
and ensure correct fuse type and size before replacement.
5.2 Alarm Jumper Setting
The alarm relay contacts can be individually set to Normally Open (NO) or Normally
Closed (NC) by positioning jumpers located inside the unit (see Figure 4). The fac-
tory default setting is Normally Open (NO).
Figure 4–Rear view, cover removed, showing jumper location