Alpha Technologies BPT Series Bypass Transformer - Manual (Page 5)

CAUTION: Before attempting to install either the Bypass Switch or the Bypass
Transformer please read the instructions contained in this manual. It provides
information on how to install and test bypass switches in North America and some
foreign countries. If in doubt, contact Alpha Technologies for assistance.
Do not work alone under hazardous conditions.
For safety reasons the installation must be carried out by qualified personnel.
Since there are many possible voltages, voltage combinations and configurations possible
throughout the world, only the more common ones are described in this manual.
If you have an installation configuration that is not described in this manual contact Alpha
for assistance.
Before proceeding, you should read this manual and be sure you understand its intent.
Carefully unpack the components. Report any shipping or other damage at once.
Always assume electrical connections or conductors are live. Turn off all circuit breakers
and double-check with a voltmeter before performing installation or maintenance.
Do not discard this manual. It should be kept with the UPS and the Bypass Switch. Should
the UPS ever need to be removed or physically disconnected for service, or relocated, the
installation testing procedure (Section 4.1 on page 9) MUST be performed again BEFORE
the bypass switch is operated.








1 Safety Checklists
Safety Checklists
Doc# 020-133-B0 Rev. 01 / 07
1