Alpha Technologies 255A Bypass Switch - Manual (Page 6)

0200018-J0 Rev C 4
WARNING!
You must read and understand the following warnings before installing the Alpha MBS
and its components. Failure to do so could result in personal injury or death.
1.2 General Warning and Cautions
• Read and follow all instructions included in this manual.
• Do not work alone under hazardous conditions.
• Only qualified personnel are allowed to install, operate and service this system and its components.
• Before proceeding, read this manual and be sure you understand its intent.
• Always assume electrical connections or conductors are live. Turn off all circuit breakers and dou-
ble-check with a voltmeter before performing installation or maintenance.
• Keep tools away from walk areas where you or others could fall over them.
• Wear safety glasses when working under any conditions that might be hazardous to your eyes.
• Do not work on the system, or connect, or disconnect cables during periods of lightning activity.
• If you have an installation configuration that is not described in this manual contact Alpha for assis-
tance.
1.3 Certifications and Compliances
The Alpha MBS has been designed, manufactured, and tested to the requirements of the following na-
tional and international safety standards:
; UL 508