Alpha Technologies 255A Bypass Switch - Manual (Page 10)

0200018-J0 Rev C 8
3.3 Lockout with a Padlock
When someone is working on the UPS, they may want to padlock the handle in the BYPASS position to
prevent anyone changing the handle position while the work is in progress.
A padlock can be attached to the red bar at the bottom of the manual switch. Push the red bar in, and
route a padlock (or lockout bar) through the openings on the face, down toward the bottom of the legend
(Figure 2).
Figure 2 — Lockout with a padlock