Alera Lighting L8 - Manual

Page 1/1 Rev. 01/14/14 RECESSED / L8 TID
LINE 8
Technical Installation Data
© 2014 Alera Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
7 1 ⁄
8
" Max.
4¾" Min.
SINGLE MOUNTING
ROW MOUNTING
Flush Trim Flush Flange Trim Flange End View
Regressed Trim Regressed Flange Trim Grid Side View
Lay-in exposed grid. Fits standard 1" wide,
1½" tall tee. Type F For hard ceiling applications. Yoke
hangers are shipped separately. Carrier
channel by others.
Type GF Fixtures mount on standard
exposed tees at end of fixture and support
tile at sides. Fits standard 1" wide, 1½"
tall tee.
9¼" I.D. Carr. Chan.
9¼" I.D. Carr. Chan.
Self aligning louver
tips into place
T8 shown above - results will vary with T5/T5HO lamps
C B
A A
A A
C C B
A A
A A C
A
A
Plaster Frame Opening:
8" × Nom. + ¼" Housing Nominal Lengths:
2', 3', 4', 6', and 8'
Housing Nominal Lengths:
2', 3', 4', 6', and 8'
Knockouts:
A - ½" Mounting K.O.
B - 7 ⁄
8
" Service K.O.
C - 2" × 3" Access K.O.
LOUVER RETENTION
For Yoke Mounting
3" 3"
Flange Opening: 8" × Nom. + ¼"
INSTALLATION DATA
6" 6" 6"
7¾"
8" R.O. 8" R.O.
8" R.O.
8" C-C Tees
8" C-C Tees
7¾"
7¾"
Nominal
INT (Intermediate Fixture) - Nominal EOR (End of Row) - Nominal
Nominal
6"
5½" Max.
3" Min.
8 3 ⁄
8
" O.A. Trim
8 7 ⁄
8
" O.A. Trim
7¾"