Alera Lighting IT9 - Wall Mount - Manual (Page 2)

3-6
T
W
ALL
B
RA
CKET
I
NST
ALLA
TION
C
ORNER
D
IMENSIONS
T
ECHNICAL
I
NSTALLATION
D
ATA
IT9 W
ALL
M
OUNT
1) Secure nipple to bracket with locknut.
2) Attach wall bracket to wall securely. Feed wires should be
pulled through the hollow threaded nipple.
3) Install canopy over wall bracket until it is firmly seated
against wall.
4) Align the hole in the fixture with the hollow threaded nipple.
5) Install fixture shim, washer, and lock nut inside the fixture
housing.
6) Make wire connections within the fixture housing and
ground inside fixture.
4 ″
5 /
16
″ mtg. hole
(4 places)
5 ″
4 ″ 5″
Wall Bracket Detail
4” octagonal outlet box at feed point (by others)
Lock nut
(inside fixture housing)
Fixture shim (inside fixture housing)
Washer (inside fixture housing)
Hollow threaded nipple
Cast aluminum wall bracket (mtg. hardware not included)
Canopy
Hollow threaded nipple secured to bracket with locknut
Washer
Nut
Shim
1 3 /
4
″
AL 10/07
90 ° 135 °
90 °
135 °
12 ″
6 3 /
4
″
6 3 /
4
″
701 Millennium Blvd
Greenville SC 29607 • (864) 678-1000
www.aleralighting.com
We are architectural fluorescent lighting
Subject to change without notice.