beautypg.com

Aeromotive 17143 - 96-98 1_2 4.6L DOHC COBRA A1000 FUEL SYSTEM User Manual

Page 11

background image


4-7. Using a properly sized wrench, complete threading the two components together (The maximum allowable gap

between the two fitting components is .030 inches).


4-8. Inspect the hose for push out by comparing the mark you made on the hose in step D to the hose end socket location.

4-9. Clean all debris from exterior and interior of hose.

4-10. All lines should be tested to twice their operation pressure prior to use.

This manual is related to the following products: