ABUS TVCC50030 - Manual (Page 35)

35
White Balance
Function Description
ATW Auto Tracking White Balance
The white balance will be performed dynamically and
continuously in a range of 1800~10500K.
AWB Auto White Balance
The white balance is performed once at a restart of the
camera.
PTL Push to Lock
The white balance will be performed after pressing the
„Enter“ button on the back side of the camera. This value will
be used permanentely.
Enhance
Enhance Menu
AGC
14
Gamma 07
Aperture 2
DSS 4x
DNR 3D DNR
Back Exit
Function Description
AGC Automatic Gain Control (0~32)
The higher the value, the higher the maximum gain level will
be. At higher value in low light condition the image
performance will be improved. The image noise could be
increased in this case.
Gamma Gamma value (01~09)
Matching the gray scale to the image display device.
Aperture Apertur value (0~3)
A higher value will increase the sharpness, but could
increase the image noise.
DSS Digital Slow Shutter (DSS) (Off, 2X~128X)
In low light conditions, images can be integrated, to achieve
a better image performance. A decrease of the frame rate
will be caused at same ratio.