Description of device, Mounting – ABUS TVCC50030 User Manual
Page 28

28
5. Description of device
5.1 Overview – article numbers
Article number
TVCC50030
TVCC50530
Resolution
650 TVL
650 TVL
WDR
DNR 2D/3D-DNR
2D/3D-DNR
Day/Night
(removable IR cut-filter)
Operating voltage
12VDC/24VAC
110-240VAC
5.2 Unpacking
While you are unpacking the device please handle it with utmost care.
If you notice any damage of the original packaging, please check at first the device.
If the device shows damages, please contact your local dealer.
6. Mounting
6.1 Power supply
Before you start with the installation please make sure that the main voltage and the nominal
voltage of the camera comply together.
TVCC50030
TVCC50530
(1)
TVCC50030 is run by a 12 VDC / 24 VAC power supply. The polarity can be ignored.
In order to connect a 12 VDC power supply (DC Connector 5.5mm x 2.1mm) to the camera
you have to first install the included connector cable. Therefore you need to press the pins
and insert the cable ends into the terminals.
(2)
TVCC50530 is run by a 110~240VAC power supply (preinstalled cable).