AAEON PCM-3660 Rev.B - Manual (Page 7)

P C / 1 0 4 P e r i p h e r a l M o d u l e P C M - 3 6 6 0 R e v . B
PCM-3660 Rev.B Quick Installation Guide 1-7
Software Configuration
The PCM-3660 Rev. B module is supplied with a software utility disk.
This disk contains the files necessary for setting up the Ethernet
controller. Directories and files on the disk are as follows:
1. RSET8019.EXE
This program enables you to view the current Ethernet configuration,
reconfigure the Ethernet interface (medium type, etc.), and execute
useful diagnostic functions.
2. PG8019.EXE
The PCM-3660 is initially set up at the factory using this program.
When you receive your card, use RSET8019.EXE to configure it for
the working environment. If by chance the EEPROM becomes
corrupted, the PG8019.EXE program allows you to reconfigure the
card.
3. 8019AS.CFG
When you run PG801 9.EXE, it will read the configuration
parameters stored in this file.