Gorman-Rupp Pumps 06C1-GHH 1071445 and up - Manual (Page 9)

OM-03179 0 SERIES
PAGE B - 2 INSTALLATION
Table 1. Pump Specifications
Pump Type Self‐priming, centrifugal with enclosed impeller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suction 6-inch “Victaulic” fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Discharge 4-inch petroleum flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal Capacity See the Performance Curve, Page E-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impeller Shaft Seal Mechanical self‐lubricated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gearbox (Air Shift)
Air Pressure Required at Shift Cylinder 70-140 psi (5,1-10,2 kg/cm@) through 1/4” line
Gear Ratio 2.56:1 Speed Increase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input shaft Rotation Clockwise (when viewed from the trunnion end) . . . . . . . . . . . . . . . . . . . .
Maximum Input Speed (See the Performance Curve, Page E-1) . . . . . . . . . . . . . . . . . . . . . .
Input & Output Shaft Heavy‐duty 2-3/4 inch - 10 spline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input & Output Flanges “Dana” Heavy‐Duty 1810 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lubrication 68 U.S. ounces (2011 ml) - See LUBRICATION, Section E for SAE grade . . . .
16 fl. oz. (18 ml) `MolykoteR M Gear Guard' (Dow Corning)
Approx. Net Weight (06C1-GHH) 384 pounds (174 kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Approx. Net Weight (06C3-GHH) 434 pounds (197 kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Approx. Net Weight (06D1-GHH) 384 pounds (174 kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Approx. Net Weight (06D3-GHH) 434 pounds (197 kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2. Through Torque Capacity Based On Shaft and Spline Size
Type of Engine Transmission Max Through Torque
Ft. Lbs.
(M. Kg.)
Diesel Automatic 11,000
(1521)
Diesel Manual 10,000
(1383)
Gasoline Automatic 13,300
(1839)
Gasoline Manual 12,300
(1701)
Pump Mounting Dimensions
A 40-inch (1016 mm) cross member is provided
for mounting the output end of the gearbox, and a
trunnion mount is provided for the input end. This
design provides a flexible three‐point suspension.
The trunnion mount prevents the chassis frame
twist from being transmitted through the gearbox.
See Figures 1 on page B-3 for the physical dimen­
sions of the pump.