Andrew James AJ000477 Multi Cooker - Manual (Page 7)

7
After Use
1. Set the temperature regulator to the “0” level and pull the plug out
of the mains socket.
2. Allow the unit to cool down thoroughly before cleaning it.
Cleaning
Part Method Remark
Hotplate

Clean the hotplate
after use with a wet
towel or kitchen
paper while it is
warm. If the
residues are
difficult to clean,
put a small amount
of water on the
plate and turn it on.
The plate will be
warmed and the
residues can be
rubbed off.

Do not use any
detergent, nylon or
metal brushes as this
will damage the
hotplate.

Do not put the
hotplate into water or
wash it with water
when the hotplate is
still hot as this will
damage the hot plate
Cover

Clean with a soft
sponge and a small
amount of
detergent.

Do not use thinner,
benzene detergent or
any chemicals as this
will damage the
surface.
Temperature
controller

Clean with a soft
paper towel or a
soft towel

Do not clean the
temperature control
front as this will cause
and electric shock

After cleaning the multi cooker, wipe it carefully with a soft towel and
leave it to dry.

Once the multi-cooker hot plate is dry, dab it with cooking oil to
protect its non-stick coating.