Andrew James AJ000088 Bread Maker User Manual
Page 26
26
Troubleshooting
No
Problem
Cause
Solution
1.
Smoke is coming
from the
ventilation hole
when baking
Some ingredients may
have stuck to the
heating element. During
the first use, oil may be
present on the surface
of the heating element.
Unplug the bread maker
and clean the heating
element when it has
cooled.
First time use, dry run
the operation as
instructed.
2.
Bread bottom/
crust is too thick
Keep warm function has
been used for to long.
The bread has been kept
in the bread pan for too
long a period resulting in
a loss of water
Take bread out earlier to
avoid this occurring.
3.
It is very difficult
to take the bread
out
Kneader has stuck
tightly to the shaft in the
bread pan
After taking the bread
out, put hot water into
the bread pan and
immerge kneader for 10
minutes, then take it out
and clean.
4.
Ingredients not
evenly stirred and
don’t bake
properly
Selected programme
menu is incorrect
After operating, the
cover was opened
several times and the
bread is dry.
Select the correct
programme
Do not open the cover
whilst the bread rises