Sony Ericsson Aino™(U10) - Manual (Page 69)

Turning on and off
To turn on the headset
• Press and hold down until a light appears.
To turn off the headset
• Press and hold down until the lights have disappeared.
Pairing the headset
The MH100 is already pre-paired with the phone it is shipped with. The MH100 and the
phone connect automatically the first time you turn on this headset.
Pairing the headset with a different phone
If you want to use the headset with a different phone you need to pair the headset with that
phone. After successful pairing, the headset connects automatically to the phone as soon
as the headset is turned on and within range.
To pair the headset with a phone
1 Make sure the headset is turned off.
2 Turn on the Bluetooth function in the phone. For instructions, see To turn on the
Bluetooth function on page To turn on the Bluetooth function.
3 Turn on Bluetooth visibility in the phone. This makes the phone visible to other
Bluetooth devices.
4 Place the phone within 20 cm (8 inches) of the headset.
5 Press and hold down the on/off key on the headset for about 5 seconds until the
indicator light flashes blue and green alternately.
6 In your phone: Search for and add a new device.
7 The passcode is 0000.
8 The indicator light flashes blue for 2 seconds when successfully paired.
The headset turns off if you do not pair it with the phone within 10 minutes.
Adjusting the volume
To adjust speaker or music volume
• During a call, or when listening to music or the FM radio, swipe your finger along the
volume touch area.
69
This is an Internet version of this publication. © Print only for private use.