Pump Solutions Group Neptune - Manual (Page 12)

accessories injection Quills
used to inject chemicals pumped by metering
pumps into turbulent-flow zone of high-
pressure water or steam lines.
• operating pressures to 207 bar (3,000 psi)
• spring-loaded check valve
• available in 316 ss, PVc, Kynar® and c-20
• available in 1/2 in. and 3/4 in. nPt
eZe-grab Platforms
For portable pump installations,
molded polyethylene base
provides elevated platform for use
indoors or outdoors.
• Handles allow the pump to be
moved easily
back Pressure Valve &
Pressure relief Valves
Valves ensure the set pressure is maintained at the pump outlet port
(discharge) to assure accurate metering and prevent siphoning. back
pressure valves are a required accessory when pumping to a low pressure
injection point below the tank level or when pumping from a builk tank
with a high head pressure.
• available in 316 ss, PVc, Kynar® and c-20
• PtFe diaphragm
calibration columns
Provide a fast, easy, economical way to check
the flow rate of a chemical metering pump.
• PVc with slip-on caps for top filling and
easy cleaning
• shielded-glass available for acid and
strong chemical applications
• Mylar lamination for protection against
harsh chemicals
• 100-4,000 ml capacity (dual scales)
corporation stops
corporation stops are used for injecting chemicals
pumped into tanks, mains, cooling towers and process
systems providing more rapid, uniform dispersion of
injected chemical. corporation stops allow injection
quills to be inserted or removed without having to drain
or shut down the system.
• operating pressures to 10 bar (150 psi)
• available in 316 ss, PVc, Kynar® and c-20
• available in 1/2 in. through 1 in. nPt or aWWa
• lever-operated stop and protection chain standard
• available with choice of bronze or 316 ss
12