Extron Electronics VS 200 SL User Guide - Manual (Page 6)

Extron • VS 200 SL • User’s Manual Extron • VS 200 SL • User’s Manual
2
Chapter Two
Installation
Rear Panel Operation
Making ShiftLock Cables
Mounting the VS 200 SL in a Rack
VS 200 SL User's Manual
Specifications
1-3
Video throughput
Gain ........................................... Unity
Bandwidth .................................. 250 MHz (-3dB), fully loaded
Rise time ................................... 1.6 bS
Frequency response .................. < ± 0.1dB to 15 MHz
Crosstalk ................................... -6dB @ 3.58 MHz
Video characteristics
Unit-to-unit tracking (ShiftLock) .. Between units .......... ± 0.5 nS accuracy
Long-term drift ......... ± 0.5 nS accuracy
< 0.1 pixels @ 60 kHz
< 0.05 pixels @ 31.5 kHz
Video output
Number/type/format ................... 1 RGBHV, RGBS, RGsB
Connectors ................................ 5 BNC female
Nominal level ............................. 1V p-p
Impedance ................................. 75 ohms
Return loss ................................ -30dB @ 5 MHz
DC offset ................................... ± 5mV maximum
Sync
Input type ................................... RGBHV, RGBS, RGsB
Output type ................................ RGBHV, RGBS, RGsB
ShoftLock connectors ................ 2 female jacks (ShiftLock)
Input level .................................. TTL ............ 0.5V to 5V p-p
Output level ............................... TTL ............ 4V to 5V p-p
Input impedance ........................ 510 ohms
Output impedance ..................... 75 ohms
Output level ............................... 4V to 5V p-p
Max. rise/fall time ...................... 4.15 nS
Polarity ...................................... Positive/negative
General
Power ........................................ 100VAC to 240VAC, 50/60 Hz, 12 watts,
internal, autoswitchable
Temperature/humidity ............... Storage -40° to 158°F (-40° ro +70°C) / 10%
to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount ............................... Yes, with optional 1U rack shelf, part #60-
190-01
Enclosure type ........................... Metal
Enclosure dimensions ............... 1.75”H x 8.75” W x 9.50” D
4.45 c mH x 22.2 xcm W x 24.13 cm D
Sjipping weight .......................... 5 lbs (2.3 kg)
Vibration .................................... NSTA 1A in carton (National Safe Transit
Association)
Approvals .................................. CE
MTBF ......................................... 30,000 hours
Warranty .................................... 2 years parts and labor
Specifications are subject to change without notice.