Extron Electronics MTP 15HD A Series User Guide Rev. C - Manual (Page 24)

Rack Mounting Procedure
These units can be mounted on any of these optional rack systems, including:
• RSF 123: 3.5 inch deep, 1U rack shelf kit
• RSB 123: 3.5 inch deep, 1U basic rack shelf
• RSU 126: 6 inch deep, 1U rack shelf kit
• RSB 126: 6 inch deep, 1U basic rack shelf
• RSU 129: 9.5 inch deep, 1U rack shelf kit
• RSB 129: 9.5 inch deep, 1U basic rack shelf
To mount the unit on a rack shelf, follow the instructions provided with the shelf accessories.
Back of the Rack Mounting Procedure
The MTP can be mounted to the rear of a rack using the Extron MBB 100 1/8 and 1/4 Back
of Rack Mounting Kit. The kit allows the product to be vertically mounted to the front or rear
rack supports and facing either towards the front or the rear of the rack.
To mount the unit, follow the instructions provided with the MBB 100 kit.
Projector Mounting
Mount the unit onto a projector using the optional Extron PMK 100 1/4 rack width pole
mount kit. To mount the unit, follow the instructions provided with the PMK 100 kit.
MTP 15HD A Series • Mounting 19