Extron Electronics MTP 4T 15HD RS User Guide - Manual (Page 17)

MTP 4T 15HD RS • Reference Information 12
Part Numbers
MTP transmitter and receivers
NOTE: A complete transmission system requires one of the four transmitters built into
the MTP 4T 15HD RS and at least one MTP receiver.
Transmitter Part number
MTP 4T 15HD RS Quad MTP Twisted Pair transmitter 60-905-01
Compatible receivers Part number
MTP RL 15HD RS receiver 60-735-01
MTP RL 15HD RS SEQ receiver 60-735-02
Included parts
The following parts are included in each order for an MTP 4T 15HD RS:
Included parts Part number
Rubber feet (self-adhesive) (4)
MBD 149 1U through-desk and rack mounting kit
70-077-03
IEC power cord
Tweeker (small screwdriver)
Setup Guide
Cables
NOTE: Enhanced Skew-Free™ A/V UTP cables are not recommended for Ethernet/LAN
applications.
Enhanced Skew-Free AV cable Part number
Enhanced Skew-Free AV UTP cable
(cut, various lengths) 26-569-xx
Enhanced Skew-Free AV UTP cable 1000’ (300m)
(bulk) (non-plenum) 22-141-03
Plenum enhanced Skew-Free AV UTP calbe 1000’ (300m) (bulk) 22-142-03
Connectors
Connector Part number
CAT 6 jack (black), qty. 10 100-476-01
CAT 6 jack (red), qty. 10 100-477-01
CAT 6 jack (blue), qty. 10 100-478-01
CAT 6 jack (orange), qty. 10 100-479-01
CAT 6 jack (gray), qty. 10 100-480-01
CAT 6 jack (white), qty. 10 100-481-01
CAT 6 jack (ivory), qty. 10 100-482-01