Extron Electronics MPS 602 Series User Guide - Manual (Page 36)

Command ASCII Command
(host to switcher)
Response
(switcher to host)
Description
Mic level
Specify gain 16* X$ G Aud X^ ] The X$ variable is a positive number.
Specify attenuation 16* X% g Aud X^ ] The X% variable is a positive number.
View mic level 16G/g X^ ] X^ = overall mic gain or attenuation
between -18 dB and +60 dB.
This response variable indicates
attenuation as a negative number
and gain as a positive number.
Mic mute
Turn mic mute on/off X# M/m Mix X# ] Turn mic mute on or off.
0=off, 1=on.
View mic mute status M/m X# ] Mic mute status: (0=off, 1=on)
default: off.
Mic talk-over threshold
Set talk-over threshold X*
*2 # Thr
X* ] Sets the mic threshold level.
X*
= 0 through 30, default = 8.
Decrement threshold –*2# Thr
X* ] Decrements mic threshold one step.
Increment threshold +* 2# Thr
X* ] Increments mic threshold one step.
View mic talk threshold 2# X* ]
Status command of DIP switches
Read status of DIP switch
positions E 42STAT } Stat42* X2% • X2^ • X2& ] X2% = 48V phantom power
(0=off, 1=on)
X2^ = HDMI audio mute
(0=unmuted, 1=muted)
X2&
= Video output
(0=DTP, 1=HDMI)
Status of Analog Audio Clipping
Read analog audio clipping
status of currently selected
input E 41STAT } Stat41* X# ] X# = 0=off/not clipping
1=on/clipping (unsolicited)
NOTES: X# = Status 0= off/disabled (default), 1=on/enabled
X$
= Mic gain 0 to 60 in 1 dB steps
X% = Mic attenuation 1 to 18 in 1 dB steps
X^ = Mic level -18 to +60 in 1 dB steps (default=0)
X* = Mic talk-over threshold level 0 to 30 in 1 dB steps (default=8)
X2%
= 48V phantom power 0=off (default)
1=on
X2^ = HDMI audio mute 0=off/unmuted (default)
1=on/muted
X2& = Video output selection 0=DTP
switch status 1=HDMI
MPS 602 • Remote Communication and Control 30