Extron Electronics Global Configurator 2.2 - Manual (Page 6)

Global Configurator, Windows-based Control Programs
PRELIMINAR
Y
Importing from a disk
1. Choose the Disk radio button.
2. Browse to a compressed GC2 project file (.gcc) previously exported from a
disk, as shown on the following page.
3. Click OK.
Step 2: Rebuild all configurations.
1. Before rebuilding, name and save the project by selecting the
Save Project As...
option from the File menu.
2. From the Build menu, choose Build All Configurations. The Upload Manager
appears when the build is complete.
3. On the Upload Manager window, click Begin.
4. Click Close when the upload is complete.
PRELIMINAR
Y