Xylem MULTI 3400i pH/Oxi MULTI-PARAMETER METERS - Manual (Page 40)

Operation pH/ 3400i
40
Note
In chapter 6 W
HAT TO DO IF ... from page 63, you will find the measures
to take for error elimination.
4.4.6 Entering the salt content (salinity)
A salt content correction is required in the oxygen concentration mea-
surement of test samples with a salt content of more than 1 g/l. To do
this, you have to enter the salinity equivalent of the test sample (range
0.0 - 70.0) and to switch on the salinity correction.
Entering the salinity
Note
How to switch on the salt content correction is described on page 34.
1 Determine the salinity of the test sample.
2 Press the key repeatedly until Sal appears on the dis-
play.
3 Enter the salt content with <
▲> <▼>.
4 Switch to the measuring mode with .
° C
TP
cm M
cm
8
LoBat
Time Baud
Day.Month No.
Ident Year
%
mbar
1
S
RCL AR
Store Auto
Cal
° F
1/
/ K %
TDS UpH Sal
mV/pH
S/ m
cm
Lin
Tref25 Tref20
nLF
AutoCal DIN
AutoCal TEC
6 9 6
5 5
O
mg/l
ARng
Sal
0