Xylem PL200-H HYDRANT WATER PRESSURE LOGGERS - Manual (Page 4)

Global Water
800-876-1172
• globalw.com
- 4 -
IV.
Specification:
Power Supply: One 3.6 Volt, 2.4Ahr, AA Size Lithium Battery
Global Water Part number 01-678
or from mouser.com, part number 667-TL5903S
Operating Temperature Industrial, -40ºC to +85ºC
Pressure Sensor: 0-200 psi gauge type sensor
300 psi over-pressure
Accuracy, +/- 1%, full scale
Battery voltage monitor
Analog Resolution: 12-Bit, 4096 Steps
Sensor Warm-up Time: 0 Seconds (50mS Actual)
Sample Modes: Fixed Interval: Programmable from 1 Sec. to >1 Year
High Speed: 10 Samples per second
Logarithmic Sample Rate (Approximation)
Exception (Log only on deviation from previous reading)
Storage Capacity: 81,759 Recordings of water pressure and battery
voltage with date/time stamp
Communication Ports: USB Type B
Selectable Baud Rates: Auto detect or fixed rates at
9600, 19200, 28800, 38400, 57600, 115200
57.6K Baud is recommended
Thread Size: PL200-H-1: 2.5” BSP Male
PL200-H-2: 2.5” NHT Female
Spanner Wrench: Optional, 95-100mm
Part Number 01-827
Optional Adaptors: 2.5” BSP Female to 2.5” NHT Female
Part Number 01-826
Call for other available adaptors