Xylem Expert 800-900 - Manual (Page 25)

Manual
GB Manual Expert Log 800-900.doc
25
If a mark is set, a new recording starts. This means that at the next read-out of the active recording
(only No. 1) only data recorded after the mark was set is included in the read-out.
Description of individual modules
Each module can be directly invoked from the reader (data is transferred automatically). If the module
is invoked directly, the file to be processed can be read by clicking "File – Open...”.
Air pressure-compensation (Air pressure-Comp.)
In this module one or more (if invoked from the Reader) files are compensated for air pressure. The air
pressure is taken either from a previously created "*.idc” File, or a fixed air pressure (constant) is used
for compensation.
If the air pressure data file read in contains measured values from a device of the type Expert Log,
then Channel P2 is the "Channel with air pressure”.