Xylem Expert 800-900 - Manual (Page 17)

Manual
GB Manual Expert Log 800-900.doc
17
Save if delta Channel > Val1
Recording only takes place if the measured value of the channel where event-driven recording is
scheduled is greater by Val1 than the last recorded value. After Write Configuration a reference
value will be recorded.
Recording if delta Ch > Val1
= Reference measuring
Ch = Recording
= measured Value
}
Val1
}
Val1
}
Val1
t
Start recording if Channel > Val1
Recording is started as soon as the measured value of the channel where event-driven recording is
scheduled is greater than Val1.
Start Recording if Ch > Val1
= Recording
Ch
= measured Value
Val1
t
Start recording if Channel < Val1
Recording is started as soon as the measured value of the channel where event-driven recording is
scheduled is less than Val1.
Start Recording if Ch < Val1
= Recording
Ch = measured Value