2 loading an executive program – Xylem SDI-12 Data Logger iLink User Manual
Page 58

58
iLink - Configuration and Support Utility
iQuest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email: [email protected]
Once the file is selected, click on the [
Update
] button to initiate the update process.
A confirmation dialog will be presented as a reminder that communications must not be lost during the
update process.
Click on [
OK
] to confirm that you wish to begin the update.
During the update process, a progress indicator provides visual feedback of the status of the upload.
Once the update is complete, a dialog will be shown confirming that the update was successful.
7.2.2 Loading an Executive Program
The “Executive” file in a device is analogous to the operating system in a PC. It is the Executive that is the
main firmware component and can be uploaded via a radio communications link, although this may take a
considerable time and is not recommended. No changes will occur within the device until the Executive
file is fully loaded and verified.
From the [Tools][Program Device] menu, click on the [
Browse
] button in the ‘Executive Firmware Update’
panel.