Xylem SDI-12 Data Logger iLink - Manual (Page 36)

36 iLink - Configuration and Support Utility
iQuest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email: [email protected]
6.2.2 Examples of Sensor Configurations for DS-CPU3
Some examples of sensor configurations are:
Water Level #1
Rainfall
In the above examples, only Water Level #1 and Rainfall are active, indicated by
the tick next to each in the Sensor Configuration box.
6.2.3 Transferring Sensor Configurations to the DS-CPU3
This is achieved from the DS-CU3 configuration dialog. Once any necessary changes have been made to
the sensor configurations, click on
[Update] to send the updated configuration to the DS-CPU3.
A message will be shown confirming the successful update.
6.2.4 Saving the Sensor Configuration
You can save the configuration shown in iLink by clicking on the
[Save] button in the configuration dialog
and specifying a file name, or by closing the dialog and answering ‘Yes’ to the prompt to save.