Array id, Confirmation – Xylem SDI-12 Data Logger iLink User Manual
Page 53
i
Quest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email:
iLink - Configuration and Support Utility
53
Array ID
1. Accept the default array ID (which equates to the sensor number being configured) or uncheck the
box and enter your own array ID.
2. Click
[Next]
to continue.
Confirmation
1. If you are happy with the settings you have entered, click
[Finish]
to create the sensor. You can then
review the settings and make any modifications necessary.
2. Alternatively,
click
[Back]
to step back through the various steps and review your settings.