Xylem pH/ION 3400i ION SELECTIVE ELECTRODE ANALYZER - Manual (Page 52)

Operation pH/ 3400i
52
4.6.4 Clearing the memory
With this function, you can delete stored data records. 500 storage lo-
cations will then be available again.
Note
The Clear memory function only appears when there are data records
stored in the memory. Otherwise, the measuring instrument automati-
cally switches to the last active measuring mode.
Proceed as follows to clear all data records:
Note
The calibration data remain stored and can be called up.
1 Switch off the measuring instrument.
2 Press the key and hold it down.
3 Press the key.
The display test appears briefly on the display.
4 Confirm the clearing process with .
Pressing any other key prevents the clearing, the data records
will remain stored.
RCL
d
ARng ConCal
Auto
0
No.
LoBat
Day.Month
Year Ident
UpH
AR
%
°F
°C TP
mV/pH
mol/L
TempError AutoCal DIN CalError
AutoCal TEC
Time Baud
1
S
mg/L
% ppm
ISE
o St
r c l
Store