Xylem pH/ION 3400i ION SELECTIVE ELECTRODE ANALYZER - Manual (Page 43)

pH/ 3400i Operation
43
Message
StoFull StoFull StoFull StoFull
This message appears when all of the 500 storage locations are occu-
pied.
You have the following options:
3 Using <
▲> <▼>, set the required ID number
(1 ... 999).
4 Confirm with .
The measured values are stored. The instrument changes to
the measuring mode.
RCL AR ARng
No.
Auto
8
%
°F
4 2
°C TP
mV/pH
mol/L
TempError
LoBat
AutoCal DIN CalError
AutoCal TEC ConCal
Time Baud
Day.Month
Year
1
U
S
mg/L
% ppm
ISE
2 99 6
pH
2
Store
Ident
Saving the current measured value.
The oldest measured value (storage location 1)
will be overwritten by this Press
Returning to the measuring mode without saving press any key
Outputting the data storage see
section 4.6.3
Clearing the memory see
section 4.6.4