YSI 650 MDS - Manual (Page 3)

YSI Incorporated 3 650 MDS
TABLE OF CONTENTS
SECTION 1 INTRODUCTION 5
SECTION 2 GETTING STARTED 5
2.1 UNPACKING 6
2.2 UNDERSTANDING THE 650 MEMORY 6
2.3 650 CONFIGURATIONS 7
2.4 650 FEATURES 10
2.5 BATTERIES AND CHARGING 11
2.6 TURNING THE INSTRUMENT ON 14
2.7 ADJUSTING THE DISPLAY CONTRAST 15
2.8 USING THE 650 KEYPAD 16
2.9 CONNECTING TO A SONDE 19
2.10 UNDERSTANDING THE STATUS BAR 21
2.11 UPGRADING ECOWATCH FOR WINDOWS SOFTWARE 22
SECTION 3 SETTING UP THE 650 22
SECTION 4 SONDE MENU INTERFACE 25
4.1 INTRODUCTION 25
4.2 SONDE MENU EXAMPLES 27
4.3 COMMON OPERATIONS USING 650 SONDE MENU SELECTION 29
SECTION 5 LOGGING DATA WITH THE 650 31
5.1 INTRODUCTION AND BASICS OF LOGGING 31
5.2 LOGGING DATA TO SONDE MEMORY 33
5.3 LOGGING DATA TO 650 MEMORY 37
5.4 650 LOGGING – “CANS” AND “CAN’TS” 48
SECTION 6 MANAGING 650 FILES 50
6.1 INTRODUCTION 50
6.2 DIRECTORY 51
6.3 UPLOAD TO PC 52
6.4 VIEW FILE 53
6.5 FILE MEMORY 54
6.6 DELETE ALL FILES 54
SECTION 7 UPLOADING DATA FROM SONDES 55
7.1 INTRODUCTION 55
7.2 UPLOAD PROCEDURE 55
SECTION 8 USING GPS WITH THE 650 55
8.1 SETTING UP THE GPS-650 INTERFACE 55
8.2 LOGGING GPS READINGS 56
SECTION 9 USING THE 650 BAROMETER 57
9.1 PRINCIPLES OF OPERATION 57
9.2 CALIBRATING THE BAROMETER 57
9.3 CHANGING BAROMETER UNITS 58
9.4 LOGGING BAROMETER READINGS 58
SECTION 10 UPGRADING 650 SOFTWARE 59
SECTION 11 TROUBLESHOOTING 60
SECTION 12 FERRITE BEAD INSTALLATION 61
SECTION 13 650 SAFETY CONSIDERATIONS 62
SECTION 14 WARRANTY AND SERVICE INFORMATION 66
SECTION 15 REQUIRED NOTICE
70
SECTION 16 650 MDS SPECIFICATIONS 70