Xylem handylab pH 12 - Manual (Page 48)

Operation handylab pH 12
48 ba75368e04 01/2011
4.6 Configuration
You can adapt the measuring instrument to your individual requirements. To
do this, the following parameters can be changed (the status on delivery is
marked in bold):
Note
You can leave the configuration menu at any time with . The parameters
that have already been changed are stored.
Baud rate
Baud rate 1200, 2400, 4800, 9600
Display during the
pH calibration Buffer nominal value, or current
electrode voltage
Calibration interval (Int 3) 1 ... 7 ... 999 d
Date/time Any
pH resolution 0.01 or 0.001
1 Switch off the measuring instrument.
2 Press the key and hold it down.
3 Press the key.
The display test appears briefly on the display. The measuring
instrument then switches automatically to the setting of the
baud rate.
4 Select the required Baud rate with <
▲> <▼>.
5 Confirm with .
CAL diSP appears on the display.
Day.Month No.
Time
1 2
M
m
% mg/l
cm
S/
cm
S
mbar
mV/pH
t n
Store Auto
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS O UpH
AutoCal DIN
AutoCal TEC
Ident Year
0 0 8 4 Baud