Xylem handylab pH 11 - Manual (Page 18)

Operation handylab pH 11
18 ba75366e04 01/2011
Note
The current AutoRead measurement can be terminated at any time (accept-
ing the current value) by pressing .
4.2.3 Measuring the ORP voltage
In conjunction with an ORP electrode, e.g. BlueLine 31Rx, the measuring in-
strument can measure the ORP voltage (U) of a solution.
Note
ORP electrodes are not calibrated. However, you can check ORP electrodes
using a test solution.
1 Perform the preparatory activities according to section 4.2.1.
2 Immerse the ORP electrode in the test sample.
3 Press the key until U appears on the status display.
The ORP voltage (mV) of the test sample appears on the dis-
play.
4 Wait for a stable measured value.
/pH
ConCal
Auto Store
LoBat
AutoCal DIN CalError
ARng AR AutoCal TEC
8
pH
1
%
°F
S
Time Baud
Day.Month No.
Ident Year
RCL
TempError
mg/L
% ppm
mol/L
ISE
3 1 2
2 0
mV
°C
U
TP
17