Xylem CG 853P - Manual (Page 29)

Operation
105
4.2.4 Printing/transmitting measured values
Measured values (data records) can be:
l printed on the integrated printer or
l transmitted to the interface.
Note
To print, you must switch on the printer using the Print key
(Print LED lights up green).
To transmit to the interface, you must connect the interface
cable. The integrated printer is then switched off automati-
cally.
You can print measured values (data records) in 3 ways:
l Switch on the data transmission (Int 2) (see page 128)
– After expiry of the selected interval, the current data
record is sent to the printer/interface.
l Switch on AutoStore (Int 1) (see page 119)
– After expiry of the selected interval, the current data
record is sent to the printer/interface and in addition is
stored in the data store of the instrument
– AutoStore (Int 1) covers the data transmission interval
(Int 2).
l Press the key
This manually triggers a printout of the current measured
values at any time - independently of the selected inter-
vals.
Note
If you connect a recorder (analog output), both the output to
the integrated printer and the digital output are switched off.